CASE 440 CT Series 3 (2013): Low Hours, High Value in a Proven Platform
Fleet managers and contractors shopping the compact track loader market know the challenge: finding a machine with enough life left to justify the investment without overpaying for excess capacity. This 2013 CASE 440 CT Series 3, listed at $29,900 with just 1,699 hours on the meter, hits a practical sweet spot for operations that need reliable track-mounted performance without stepping up to a larger-frame unit.
The 440 CT Series 3 occupies CASE's legacy 400 Series 3 lineup, produced from 2008 through 2013. These machines earned a reputation for straightforward mechanical reliability and parts availability that still holds up today. With 26 images available and video upon request, buyers can conduct thorough remote inspection before committing to a purchase.
Key Specifications
| Specification | Value |
|---|---|
| Manufacturer / Model | CASE 440 CT Series 3 |
| Year | 2013 |
| Hours | 1,699 |
| Listing Price | $29,900 |
| Condition Score | 7.0/10 (Good) |
| Engine | CASE 445T/M3, 4-stroke turbocharged diesel |
| Net Horsepower | 83 HP @ 2,300 RPM |
| Peak Torque | 288 lb-ft @ 1,300 RPM |
| Displacement | 274 cu in (4.5L), 4-cylinder |
| Emissions Tier | Tier III |
| Fuel Capacity | 22 gallons |
| Operating Weight | 8,925 lbs |
| Shipping Weight | 8,255 lbs |
| Track Type | Rubber |
| Track Width | 15.7 in |
| Ground Clearance | 9.2 in |
| Travel Speed | 7.0 mph |
| Hydraulic Flow | 21.9 GPM (standard); 37.8 GPM (optional high-flow) |
| Hydraulic Pressure | 3,050 PSI |
| Tipping Load | 4,400 lbs |
| Rated Operating Capacity | 2,200 lbs |
| Breakout Force (Lift) | 4,576 lbf |
| Breakout Force (Bucket) | 6,207 lbf |
| Dump Height | 8.0 ft |
| Dump Reach | 22.8 in |
| Bucket Hinge Pin Height | 121.7 in |
| Overall Operating Height | 154.0 in |
| Overall Length (with bucket) | 129.4 in |
| Overall Length (without attachment) | 102.5 in |
| Cab | Enclosed, ROPS/FOPS Level 1, heat/A/C |
| Controls | Joystick |
| Bucket Width | 72 in |
Condition Assessment
This machine carries a Condition Score of 7.0/10, placing it in the "Good" tier on Proxy Equipment's 10-point scale. That rating reflects verified operational status and visible wear consistent with a machine that has accumulated under 1,700 hours across approximately 11 years of service life.
The seller discloses working heat and air conditioning in the enclosed cab—a critical detail for year-round operators in climates with temperature extremes. Joystick controls are confirmed functional, and the 72-inch bucket remains attached. No disclosed issues appear in the listing, suggesting either a straightforward machine or a seller with full transparency on maintenance history.
At 1,699 hours, this 440 CT averages roughly 155 hours annually—light use by commercial standards. For context, many compact track loaders in rental or municipal fleets log 500-800 hours per year. That low hourly accumulation suggests either part-time duty cycle or secondary-machine status in a larger fleet, both of which typically correlate with less aggressive wear on undercarriage components, pins, and bushings.
Buyers should still plan for a pre-purchase inspection focusing on: rubber track condition and tension, drive sprocket wear, loader arm pin bore integrity, and hydraulic system leak-down. The 26 available images and video option support initial due diligence before arranging physical inspection.
Pricing Analysis
At $29,900, this CASE 440 CT Series 3 positions competitively within the used compact track loader market. Proxy Equipment's valuation methodology—based on auction market comparables—generates a confidence score of 0.668 for this unit, indicating solid transactional data exists for similar machines.
The pricing logic breaks down across several value drivers:
- Hours premium: Sub-2,000-hour CTLs in the 80-90 HP class command measurable premiums over comparable models with 3,000+ hours. This machine's 1,699 hours place it in desirable territory for buyers prioritizing remaining service life.
- Cab configuration: Enclosed cabs with functional climate control add $2,000-$4,000 in typical resale value versus open-station equivalents, particularly in northern climates or summer-intensive work zones.
- Joystick controls: Operator preference has shifted strongly toward joystick over pilot hand/foot controls. This configuration aligns with current training standards and reduces operator transition friction.
- Tier III engine: While not the latest emissions class, Tier III powerplants avoid the complexity and aftertreatment costs of Tier 4 Interim and Final engines. For buyers in regions without strict emissions enforcement, this simplifies maintenance and reduces long-term operating expense.
The 7.0 condition score supports the asking price without overstating perfection. Buyers aren't paying for a near-new machine, but they're also not absorbing the risk and immediate repair costs typical of 5.0-and-below units.
What Makes This Machine Stand Out
Several specific attributes differentiate this 440 CT from typical listings in the sub-$30,000 CTL segment:
Proven Powertrain Architecture: The CASE 445T/M3 engine is a mechanical-injection, direct-injected diesel without the variable-geometry turbos, DEF systems, or DPF regeneration cycles that complicate newer machines. Peak torque arrives at just 1,300 RPM—low-end lugging power that benefits grading, digging, and material handling applications.
Optional Capability Pathways: The factory architecture supports high-flow hydraulics (37.8 GPM), two-speed travel, and hydraulic attachment couplers as dealer-installed or field retrofits. A buyer acquiring this base machine retains upgrade flexibility for mulching heads, cold planers, or other power-hungry attachments.
Operator Environment: The cab specification includes suspension seating, tilt ROPS for maintenance access, and an emergency escape rear window. These details matter for retention in competitive labor markets where operator comfort influences job acceptance.
Documentable Low Use: 1,699 hours with video verification provides concrete negotiation leverage and financing confidence. Lenders typically favor machines with clear hour documentation and remaining productive life.
Who This Machine Is For
This CASE 440 CT Series 3 suits several buyer profiles:
Growing General Contractors: Companies expanding from skid steer to compact track loader fleets gain flotation and traction advantages for muddy sites without the capital commitment of a new machine. The 2,200-lb rated operating capacity handles palletized material, light grading, and backfill work efficiently.
Utility and Municipal Departments: The enclosed cab, straightforward mechanical systems, and parts commonality with other CASE legacy products align with municipal procurement preferences for maintainable, long-service-life equipment.
Agricultural Operations: Farmers and ranchers needing a versatile loader for manure handling, feed operations, or snow removal benefit from the track system's low ground pressure versus wheeled alternatives. B5/B20 biodiesel compatibility supports fuel flexibility.
Rental Fleets: The age and hours profile fits rental rotation strategies—enough capability and condition to generate revenue without tying up premium capital in newer units that depreciate faster.
Landscaping and Site Preparation Specialists: The 72-inch bucket and 8-foot dump height accommodate standard dump truck loading. Optional high-flow hydraulics (if retrofitted) expand attachment compatibility for brush cutting and soil conditioning.
Next Steps
With 26 images, video availability, and a transparent condition score, this listing provides the verification tools serious buyers need for remote evaluation. The combination of low hours, functional climate control, and joystick operation at a sub-$30,000 price point creates immediate utility value without the depreciation curve of new equipment.
View this listing to access full photo galleries, video content, and direct inquiry options for this CASE 440 CT Series 3.