Equipment Spotlights

2015 Volvo EC300ELR: Long-Reach Excavator With 2,295 Hours for Under $85K

A purpose-built slope-finishing machine with verified low hours, a Volvo D8M engine, and 61 feet of reach — priced to account for needed hydraulic repairs

By Proxy Equipment Team, Market AnalysisNovember 16, 20267 min read
2015 Volvo EC300ELR: Long-Reach Excavator With 2,295 Hours for Under $85K

A 2015 Volvo EC300ELR with 2,295 hours and a 61-foot reach configuration offers contractors a rare combination of specialized capability and accessible pricing. Listed at View this listing for $84,900, this long-reach crawler excavator targets operators who need extended dig depth and slope access without the premium of a new machine.

The EC300ELR fills a specific niche in the Volvo excavator lineup: deep-digging, ditch-cleaning, and slope-finishing work where standard-reach machines fall short. Volvo built this model from 2015 through 2018 with a focus on fuel efficiency through its Tier 4 Interim D8M engine and hydraulic system optimized for precision work rather than pure production loading. For buyers weighing a long-reach conversion against a factory-configured machine, this unit represents a straightforward alternative.


Key Specifications

Specification Detail
Manufacturer Volvo
Model EC300ELR
Year 2015
Hours 2,295
Category Crawler Excavator
Front Configuration Long Reach
Boom Length 26' (pin-to-pin)
Stick Length 33'6"
Max Digging Depth 48.4 ft
Max Digging Reach 61.0 ft
Max Dumping Height 41.3 ft
Engine Volvo D8M (CFVI180A)
Net Horsepower 241 hp @ 1,800 rpm
Hydraulic Flow 72.9 GPM
Breakout Force (Normal) 15,500 lbf
Tearout Force (Normal) 11,465 lbf
Emissions Tier Tier 4 Interim
Fuel Capacity 124.7 gal
DEF Tank Capacity 13.2 gal
Track Gauge 102.0 in (2,590 mm)
Tail Swing Conventional
Overall Length 47.8 ft (14,565 mm)
Overall Height (Cab) 10.2 ft (3,110 mm)
Operating Weight ~77,000–82,000 lb class
Attachments Included 72" bucket
Cab Type Enclosed
Quick Coupler No
Dozer Blade No

Condition Assessment (Score: 6.1/10)

Proxy Equipment rates this unit 6.1 out of 10, placing it in Condition Tier 2. This score reflects a machine with verified usable life remaining and known repair needs that a qualified buyer can quantify before purchase.

Positive factors:

  • Undercarriage at 70% remaining life. For a 2015 machine with just 2,295 hours, this indicates moderate use with life left in rollers, idlers, and track chain. Most long-reach machines accumulate hours slowly on slope work rather than high-impact production digging, which helps explain the undercarriage condition.
  • Low total hours. At 2,295 hours, this excavator has approximately 25–30% of typical first-engine life expectancy for a Volvo D8M. Hours verification through service records or ECM readout (standard Proxy practice) gives buyers confidence in the meter.
  • Complete long-reach configuration. The 26-foot boom and 33.5-foot stick are factory-matched components, not aftermarket adaptations. Pin-to-pin measurements and hydraulic cylinder sizing align with Volvo's intended design tolerances.

Items requiring attention:

  • Lift cylinder leaks. Both lift cylinders show external leakage. Budget for seal kits or cylinder re-chroming. On a long-reach machine, lift cylinders operate at extended pressure cycles during deep-digging and slope work, accelerating seal wear.
  • Bucket cylinder seal is wet. This indicates early-stage seal failure. Address promptly to avoid contamination of the hydraulic system and scoring of the cylinder barrel.
  • A/C system fault. The dash displays a diagnostic code and the system blows ambient air. This likely requires refrigerant recovery, leak detection, compressor clutch inspection, and potential component replacement. In enclosed-cab excavators, functional A/C affects operator productivity and retention.

The Condition Tier 2 designation at Proxy Equipment signifies a machine that is job-ready with disclosed maintenance items. This is not a project machine requiring rebuild, nor is it a Turnkey Tier 1 unit. Savvy buyers factor repair costs into their total acquisition budget.


Pricing Analysis

At $84,900, this EC300ELR positions below replacement cost for a comparable long-reach excavator. Factory long-reach configurations from major OEMs typically command a $25,000–$40,000 premium over standard-reach equivalents when new. The depreciation curve for specialized configurations often exceeds standard machines due to narrower buyer pools.

The listing price accounts for the disclosed hydraulic and A/C issues. Industry rule-of-thumb for cylinder seal replacement on excavators of this size runs $800–$1,500 per cylinder for seal kits plus labor; complete cylinder replacement or re-chroming escalates to $3,000–$5,000 each. A/C system repairs range widely from $1,200 for refrigerant recharge and sensor replacement to $4,000+ for compressor and condenser replacement.

Comparisons in the used market depend heavily on configuration. Standard-reach EC300EL units (non-long-reach) with similar hours trade in a wider band. The long-reach specification narrows comparables but also reduces competition from buyers who cannot use the extended geometry. For contractors actively bidding slope work, stream restoration, or deep utility trenching, the configuration itself carries operational value that offsets repair investment.

The auction-market pricing method applied here reflects wholesale transaction data rather than retail asking prices. Tier 2 condition machines at this price point typically move to end users who maintain in-house service capability or to rental fleets with dedicated shop resources.


What Makes This Machine Stand Out

Factory long-reach geometry. The 61-foot reach and 48.4-foot dig depth place this machine in a category typically occupied by larger, more expensive 35- to 40-ton excavators. The EC300ELR operates in the 30-ton size class with specialized boom/stick geometry that Volvo engineered for stability at full extension. The 6,900 kg (15,212 lb) counterweight and 124.2-inch tail swing radius reflect this design intent.

Verified engine specifications. The engine tag photo confirms 241 hp at 1,800 rpm for the CFVI180A variant of the D8M. This matters because Volvo offered multiple D8M tuning levels across markets and applications. The tag read provides certainty for buyers managing fleet standardization or emissions compliance.

Hydraulic system specification. Twin variable-displacement axial piston main pumps deliver 276 LPM combined flow with implement relief at 33.3 MPa (4,830 psi). The gear-type pilot pump at 20.3 LPM provides consistent low-flow control for precision work. These specifications support the fine-control demands of slope finishing and structural demolition where long-reach machines excel.

72-inch bucket included. The bucket width matches the machine's breakout force curve for general excavation without overloading the extended stick structure. Bucket availability for long-reach configurations can be limited; having a matched bucket in the transaction reduces procurement time.


Who This Machine Is For

Slope contractors and stream restoration specialists utilize long-reach excavators for bench-cutting and erosion control where standard machines cannot position safely at the toe of a slope.

Utility contractors working deep sewer, water main, or storm drainage installations benefit from the 48.4-foot dig depth without the transport complications and job site footprint of a 40-ton class machine.

Demolition operators need reach for structural take-down while maintaining cab positioning away from falling debris. The conventional tail swing and extended counterweight provide stability for this application.

Open-pit mining and aggregate operations use long-reach units for ditch maintenance, pond cleaning, and overburden reach where production loaders handle primary material movement.

Buyers with in-house hydraulic service capability capture value from the disclosed cylinder issues. Shops equipped for cylinder rebuilds and hose fabrication turn Tier 2 condition machines into profitable fleet additions at below-market entry prices.

This unit is not ideal for: general production digging where a standard-reach machine operates more efficiently; buyers requiring immediate zero-downtime deployment; or operators in climates where functional A/C is essential year-round and no repair budget exists.


Bottom Line

The 2015 Volvo EC300ELR at View this listing for $84,900 offers specialized long-reach capability at an entry price that accommodates repair investment. The 2,295 hours and 70% undercarriage remaining provide structural and powertrain runway. Buyers comfortable with hydraulic system maintenance gain operational access to a factory-configured slope-finishing machine without the capital commitment of a new or Tier 1 used unit.

Review the 48 available images, verify hours through ECM readout, and factor cylinder and A/C repairs into your total cost model. For the right application, this EC300ELR delivers reach geometry that commands premium rates on specialized contracts.

View this listing

equipment-spotlightvolvoec300elrcrawler-excavatorlong-reachused-equipmentconstruction-equipmentexcavator-for-saleheavy-equipment